Design Rule Check Report
------------------------

Report File:        C:\Electronics\Ground Speed Radar\Radar Amp Board\Radar Amp Board (PCB - Design Rule Check Report).txt
Report Written:     Monday, February 08, 2016
Design Path:        C:\Electronics\Ground Speed Radar\Radar Amp Board\Radar Amp Board.pcb
Design Title:       
Created:            2016/02/08 10:12:42 AM
Last Saved:         2016/02/08 03:55:48 PM
Editing Time:       343 min
Units:              mm (precision 2)


Results
=======

Track to Drill Hole error (T-D) at (25.50 23.38) on layer "Top Copper".
    Track too wide to backoff from drill.
Track to Drill Hole error (T-D) at (33.12 18.30) on layer "Top Copper".
    Track too wide to backoff from drill.
Track to Drill Hole error (T-D) at (33.12 20.84) on layer "Top Copper".
    Track too wide to backoff from drill.
Track to Drill Hole error (T-D) at (33.12 23.38) on layer "Top Copper".
    Track too wide to backoff from drill.
Track to Drill Hole error (T-D) at (33.12 25.92) on layer "Top Copper".
    Track too wide to backoff from drill.
Track to Drill Hole error (T-D) at (33.12 28.46) on layer "Top Copper".
    Track too wide to backoff from drill.
Track to Drill Hole error (T-D) at (13.00 6.50) on layer "Top Copper".
    Track too wide to backoff from drill.
Track to Drill Hole error (T-D) at (18.08 6.50) on layer "Bottom Copper".
    Track too wide to backoff from drill.
Pad to Board Error (P-B) between (8.37 1.52) and (8.37 0.00) on Layer "[All]".
    Error between Component Pad C7.1 (Net 'GND') and Board, Gap is 1.45 needs to be 2.54.
Pad to Board Error (P-B) between (6.77 1.52) and (6.77 0.00) on Layer "[All]".
    Error between Component Pad C7.2 (Net '+5V') and Board, Gap is 1.45 needs to be 2.54.
Track to Drill Hole error (T-D) at (2.00 2.00) on layer "Top Copper".
    Track too wide to backoff from drill.
Pad to Board Error (P-B) between (1.24 1.24) and (1.24 0.00) on Layer "[All]".
    Error between Component Pad PL6.1 (Net '+5V') and Board, Gap is 1.17 needs to be 2.54.
Pad to Board Error (P-B) between (1.24 35.76) and (1.24 37.00) on Layer "[All]".
    Error between Component Pad PL7.1 (Net 'N0006') and Board, Gap is 1.17 needs to be 2.54.
Track to Drill Hole error (T-D) at (43.00 35.00) on layer "Top Copper".
    Track too wide to backoff from drill.
Pad to Board Error (P-B) between (43.76 34.24) and (45.00 34.24) on Layer "[All]".
    Error between Component Pad PL8.1 (Net 'GND') and Board, Gap is 1.17 needs to be 2.54.
Pad to Silkscreen error (P-S) at (54.69 12.61) on layer "Top Silkscreen".
    Silkscreen text 'PL1' overlaps pad.
Pad to Silkscreen error (P-S) at (54.69 16.65) on layer "Top Silkscreen".
    Silkscreen text 'PL4' overlaps pad.
Pad to Silkscreen error (P-S) at (54.69 20.56) on layer "Top Silkscreen".
    Silkscreen text 'PL5' overlaps pad.
Pad to Silkscreen error (P-S) at (54.69 25.01) on layer "Top Silkscreen".
    Silkscreen text 'PL9' overlaps pad.
Pad to Board Error (P-B) between (42.24 1.24) and (42.24 0.00) on Layer "[All]".
    Error between Component Pad PL10.1 (Net 'GND') and Board, Gap is 1.17 needs to be 2.54.
Track to Drill Hole error (T-D) at (18.00 2.00) on layer "Bottom Copper".
    Track too wide to backoff from drill.
Track to Drill Hole error (T-D) at (13.70 26.50) on layer "Bottom Copper".
    Track too wide to backoff from drill.
Component to Board error (Cm-B) at (55.45 11.85) on layer "[Top]".
    PL1.
Component to Board error (Cm-B) at (55.45 15.89) on layer "[Top]".
    PL4.
Component to Board error (Cm-B) at (55.45 19.80) on layer "[Top]".
    PL5.
Component to Board error (Cm-B) at (55.45 24.25) on layer "[Top]".
    PL9.
Single pin net N0068 on PL1.1 at 55.45,11.85
Single pin net N0069 on PL4.1 at 55.45,15.89
Gap in Net "N0070" between (55.45,19.80) and (55.45,24.25) 
    N0070.

Number of errors found : 29


Settings
========


Spacings

=========

Tracks        Yes
Pads and Vias Yes
Shapes        Yes
Text          Yes
Board         Yes
Drills        Yes
Components    Yes


Manufacturing

==============

Drill Breakout                  Yes
Drill Backoff                   Yes
Silkscreen Overlap              Yes
Copper Text In Board            Yes
Min Track Width                 Yes
Min Annular Ring                Yes
Min Paste Size                  Yes
Vias In Pads                    Yes
Unplated Vias                   Yes
Unplated Pads With Inner Tracks Yes


Nets

=====

Net Completion               Yes
Dangling Tracks              Yes
Net Track Length Differences No



End Of Report.