CLATHE LTC-10 FANUC OT  \OE;   {Configuration remark placed here    }*G60;
C:;   {Data Drive                          }*D;
\CNC\LATHE\OE\600;   {Data directory                      }*F40;
9600;   {Baud rate <110-9600/0-ask>          }*B;
CNC;   {Target device file                }*F40;
I;   {Format of comms <Iso/Eia/Bin/Ask>   }*AIEBA;
H;   {Storage device <Hard/Floppy>        }*AHF;
0;   {Check for Correct cable <Y-1/N-0>   }*A10;
S;   {Comms device type<Par/Ser/Dnc/Teo>  }*APSDT;
PRG;   {Default extension                   }*F3;
NO;   {Renumber on line I.D. e.g.<N>       }*F10;
PQ;   {Renumber of canned cycles           }*F10;
001;   {Start number <0-9999>               }*I0,999;
01;   {Increment    <0-99>                 }*I0,50;
3;   {Length of characters <1-5>          }*I0,5;
L;   {Control type <L/M>                  }*ALM;
Y;   {PCTools present <Y/N>               }*AYN;
N;   {Data security                       }*AYN;
$03F8;   {Serial port address                 }*H0,$03FF;
$0378;   {Printer port address                }*H0,$03FF;
FULEDIT.EXE;   {Second editor e.g(FULEDIT.EXE)      }*F40;
2;   {Wait time on input in minutes       }*I1,10;
0;   {Use harware handshake <0-NO,1-->3>  }*I0,3;
PCTOOLS.EXE;   {Editor number 2                     }*F40;
N;   {LF addition on terminal mode <Y/N>  }*AYN;
$0030;   {Interrupt to be used ($0030/$002C)  }*H$002C,$0030;
$07;   {0/0/StkPar/EvPar/ParEN/NStp/WL1/WL0 }*I0,$3F;
[$11][32][32];   {Start of transmission char          }*F30;
[$17][32][32];   {End of transmission char            }*F30;
;   {String from control to initiate     }*F30;
N;   {Convert to upcase in emulation <Y/N>}*AYN;
1;   {Control type format <0-ask,1-->6)   }*I0,6;
FANUC 0T 9600 br;   {Remark to be displayed for user     }*F20;
N;   {Terminal mode full duplex <Y/N>     }*AYN;
$11;   {X_ON Character e.g. $11             }*H$0000,$00FF;
$13;   {X_OFF Character e.g. $13            }*H$0000,$00FF;
$03;   {TX Ctrl Bits  0/0/0/0/0/0/RTS/DTR   }*IH$0,$3;
$A0;   {TX Ctrl Pause CD/RI/DSR/CTS/0/0/0/0 }*IH$0,$F0;
$03;   {RX Ctrl Bits 0/0/0/0/0/0/RTS/DTR    }*IH$0,$3;
Y;   {Allow changing of the datapath (Y/N)}*AYN;
Y;   {DO NOT ALTER RESERVED (Installer)   }*AYN;
$10;   {Background color x16 e.g.($10)-Blue }*H$0000,$00F0;
1;   {Delay between characters            }*I0,200;
%;   {START of CNC prg on RX              }*F10;
%;   {END of CNC prg on RX                }*F10;
1;   {Delay before sprocket on T.E.O. (ms)}*I0,100;
1;   {Sprocket pulse width for T.E.O. (ms)}*I0,100;
1;   {Delay after sprocket on T.E.O. (ms) }*I0,100;
[13][10];   {EOL Parameter, for EOB transmission }*F20;
20;   {Length of tape header.              }*I1,200;
20;   {Length of tape leader.              }*I1,200;
$00;   {Invert return line ($00 or $40)     }*H$0000,$0040;
$00;   {Invert data lines  ($00 to $FF)     }*H$0000,$00FF;
;   {String to stop sending device (9 ch)}*F30;
Y;   {On Serial comms wait for Xon char   }*ANY;
0;   {RESERVED DO NOT ALTER               }*R;
0;   {RESERVED DO NOT ALTER               }*R;
0;   {RESERVED DO NOT ALTER               }*R;
0;   {RESERVED DO NOT ALTER               }*R;